Maintenance

Watering properly in summer - these rules must be observed

Watering properly in summer - these rules must be observed



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Especially in the high summer temperatures, the flowers quickly hang their heads. Correct pouring is therefore an absolute must. These tips show how to do it.

Proper watering is extremely important in summer

We all know that ourselves: if the temperature rises to 30 degrees, we often feel overwhelmed by the heat. If there is no breeze at all, most of us are struggling with the weather. This is how you have to imagine the plants in your garden. However, while we can quickly escape to the shadows when the sun is strong, they have to withstand the strong sunlight.

Usually, however, most plants cannot do this alone. You need some support from you. Otherwise this can have fatal consequences. For example, your flowers dry up or even get a real sunburn (see Avoiding sunburn on plants - 4 tips) and "burn". It is therefore absolutely essential that you water the plants very carefully. Reading tip: watering flowers on vacation - 4 tips

Important rules for watering in summer

➤ Rule No. 1 - choose the perfect casting time:

In principle, it is best to water the plants in the early morning between 6 and 7 a.m. Then the temperatures are still pleasantly cool, which means that the irrigation water does not evaporate so quickly. So the plants can feed on the irrigation water for some time.

If, on the other hand, you water only in the evening hours, it could be that some long-lasting thirst plants already hang their heads by then.

➤ Rule No. 2 - the perfect amount of water:

✻ beds:

On average, 20 to 30 liters are completely sufficient per square meter of plant bed. On extremely hot days, however, you can increase this amount again by about 10 liters. However, the pouring should be very careful. If necessary, several watering runs in a row are recommended so that the water is well absorbed by the soil and can penetrate as deep as possible into the root system.

✻ Container plants / flower pots:

You should always water container plants and flower pots until the excess water flows out of the drain holes on the bottom of the pot.

✻ fresh planted flowers / plants:

Plants freshly used in the garden should be watered much more often so that they can root properly.

✻ shallow or deep roots:

In addition, you should make a clear distinction between shallow and deep-rooted roots when watering, since flat-rooted roots in particular logically require a lot more and consequently also more water than deep-rooted roots.

✻ lawn:

Many make the mistake that they only blow up their lawns much too late in summer and then form brown spots (dry fields). In order to prevent the emergence of such dry fields, you should try to water your lawn briefly from around the first drying week in the late evening hours (approx. 10 to 15 liters per square meter).

➤ Rule No. 3 - Use rainwater for watering:

Rainwater is the perfect irrigation water! Therefore, it is best to set up a rain barrel in your garden to collect the rainwater. This saves water costs and benefits the plant very much. Otherwise, you can also use stale tap water for watering. If you have no other option, you can of course also pour normal tap water, but this must not be too cold.

Our tip: lay a drip hose or apply bark mulch

To save yourself the constant watering, you can also install a drip hose in your beds, which ensures constant irrigation. However, you should know that the purchase of such a system is a bit expensive and you still have to monitor it (regarding pouring time, amount of water, defects, etc.).

But also the application of bark mulch in the beds ensures a longer storage of the water quantities in the soil. You can read how to do it correctly here: Spreading bark mulch - how it's done.